Breeze 60A-M FOC
- Utilizes new vfast observer technology
- low temperature
- high efficiency
- responsive
- low noise
- low interference
- good linearity
- Precise control
- kinetic energy recovery
- Specification: 60A 6~14S
Features
- FOC drive, efficient algorithm, good adaptability, high force efficiency, low noise, better throttle linearity.
- Lightweight design, easy to use, stable and reliable, good speed regulation performance.
- Multiple protections: low voltage protection, high voltage protection, start-up protection, blocking protection, over-temperature protection, over-current protection, overload protection, runaway protection, battery protection.
- Serial control and output (customizable).
protective function
- Low-voltage protection: Motor start-up is prohibited when the power supply voltage is lower than the permissible value.
- High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
- Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
- Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
- Over-temperature protection: When the temperature exceeds 120°C, the maximum output power will be reduced slowly, up to 40% of the full throttle power, and the original power will be restored after the temperature is reduced.
- Over-current protection: limit the peak current and do not exceed the limit value.
- Overload Protection: When the motor is recognized to be overloaded, the maximum throttle is limited to protect the powertrain.
- Loss of control protection: Gradually reduce the output power after losing the signal for 500ms, quickly reduce the throttle to less than 40% within 3 seconds, and then slowly reduce the throttle to stop.
- Battery protection: Slowly limits the output throttle to prevent battery over-discharge.
Specification
- Model: Breeze 60A-M FOC
- Voltage: 6~14S
- Throttle refresh rate: 50–500 Hz
- Size: 76*33*16mm
- Weight: 76g (including cable)
- Input signal level: 3.3 to 5V
- Continuous operating current: 60A (with adequate heat dissipation)
- Peak current (3 seconds): 80A
- Throttle travel range: 1000–2000 μs
- Communication Method: PWM
Drawings
