SKY 6S 40A_4S 50A

SKY 6S 40A_4S 50A

  • Industrial-grade professional procedures, safe and reliable
  • Lightweight design
  • Industrial-grade hardware designed to meet a variety of specialized applications
  • Highly intelligent, adaptive working parameters
  • good compatibility
  • Specifications: 6S 40A_4S 50A 2~6S
Taobao official purchase

Features

Lightweight design, easy to use, stable and reliable, strong anti-interference ability, good speed regulation performance.
Multiple safety protection: low voltage protection, high voltage protection, start-up protection, blocking protection, over-temperature protection, over-current protection, overload protection, runaway protection.

protective function

  • Low voltage protection: off by default (can be customized on).
  • High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
  • Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
  • Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
  • Over-temperature protection: When the temperature exceeds 120°C, the maximum output power will be reduced slowly, up to 40% of the full throttle power, and the original power will be restored after the temperature is reduced.
  • Over-current protection: limit the peak current and do not exceed the limit value.
  • Overload Protection: When an overload is identified on the motor, the maximum throttle is limited to protect the powertrain.
  • Loss of control protection: 200ms after the loss of signal gradually reduce the output power, in 1~2 seconds for rapid throttle reduction to less than 50%, and then slowly reduce the throttle to stop.

Specification

Model：SKY 6S 40A_4S 50A

Operating Voltage:2~6S LiPo

Continuous operating current： 6S 40A/4S 50A (good heat dissipation)

Product dimensions (without wires):55*18.5*9mm

Weight：24.9g (with wire)

BEC Output：not

Standby current：21mA@25V

Throttle travel：1000~2000us PWM(calibratable) 50~500Hz

load test

Test conditions: ambient temperature 30 ℃, data for reference only

  • Test Voltage: 16.8V & Starting Temperature: 30℃ & Power Used: Langyu X2820-5 Kv1000Ⅲ+Paddle RCW1185E

Load current 45A, wind speed 17.5m / s blowing cooling conditions, after 7 minutes of testing, work normally, 2 minutes 90 ℃ stable, no longer warmed up

Load current 50A, wind speed 18.6m / s blowing cooling conditions, after 7 minutes of testing, work normally, 3 minutes 98 ℃ stable, no longer warmed up

Load current 20A, placed in a cardboard box (15*15*5cm) under the conditions of no air cooling, after 2 minutes of testing, work normally, 2 minutes 120 ℃ overheating protection power reduction

  • Test Voltage: 26.1V & Starting Temperature: 30℃ & Power Used: Hao Ying 8107 Kv160+mg 26, 27 inch Double Propeller Stacked

Load current 40A, wind speed 14.4m/s under the conditions of wind cooling, after 7 minutes of testing, work normally, 4 minutes 113 ℃ stable, no longer rise in temperature

ESC use is recommended to blow the wind or auxiliary cooling surface better, sustained high temperature work will reduce the service life of the ESC

Scroll to Top