SKY 6S 50A_4S 60A
- Industrial-grade professional procedures, safe and reliable
- Lightweight design
- Industrial-grade hardware designed to meet a variety of specialized applications
- Highly intelligent, adaptive working parameters
- good compatibility
- Specifications: 6S 50A_ 4S 60A 2~6S
Features
Lightweight design, easy to use, stable and reliable, strong anti-interference ability, good speed regulation performance.
protective function
- Low voltage protection: off by default (can be customized on).
- High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
- Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
- Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
- Over-temperature protection: When the temperature exceeds 125°C, the maximum output power is slowly reduced, up to 40% of the full throttle power, and the original power is restored after the temperature is reduced.
- Over-current protection: limit the peak current and do not exceed the limit value.
- Overload Protection: When an overload is identified on the motor, the maximum throttle is limited to protect the powertrain.
- Loss of control protection: 200ms after the loss of signal gradually reduce the output power, in 1~2 seconds for rapid throttle reduction to less than 50%, and then slowly reduce the throttle to stop.
Basic parameter
- Model:SKY 6S 50A_4S 60A
- Voltage:2~6S
- Size:65*20.4*10.6mm
- Weight:40g (with wire)
- Continuous operating current:6S 50A/4S 60A(良好散热)
- BEC:not
- Throttle Refresh Rate:50~500Hz (100~400Hz recommended)
- Standby power consumption:21mA@25V
- Throttle travel range:1000~2000us
- Signal cable:Twisted Pair-Black/White-16.5±mm
- Three-phase cable:Silicone Wire-Blue-14AWG-70±5mm
- Power Cord:Silicone Wire-Red/Black-14AWG-95±5mm
Drawings
Test conditions: ambient temperature 30 ℃, data for reference only
- Test Voltage: 16.8V & Starting Temperature: 42℃ & Power Used: Langyu X2820-5 Kv1000Ⅲ+Paddle RCW1185E
Load current 50A, wind speed 17.5m / s blowing cooling conditions, work normally, 7 minutes 66 ℃ stable, no longer rise in temperature
Load current 55A, wind speed 19.4m/s blowing cooling conditions, work normally, 7 minutes 64 ℃ stable, no longer rise in temperature
Load current 60A, wind speed 20.2m/s blowing cooling conditions, work normally, 7 minutes 70 ℃ stable, no longer rise in temperature
- Test Voltage: 26.1V & Starting Temperature: 30℃ & Power Used: Hao Ying 8107 Kv160+mg 26, 27 inch Double Propeller Stacked
Load current 45A, wind speed 18.2m / s blowing cooling conditions, work normally, 7 minutes 75 ℃ stable, no longer rise in temperature
Load current 50A, wind speed 21.3m/s blowing cooling conditions, work normally, 7 minutes 85 ℃ stable, no longer rise in temperature
ESC use is recommended to blow the wind or auxiliary cooling surface better, sustained high temperature work will reduce the service life of the ESC






