Breeze 80A-M FOC

FOC drive, efficient algorithm, good adaptability, high force efficiency, low noise, better throttle linearity.
Lightweight design, easy to use, stable and reliable, good speed regulation performance.
Multiple protections: low voltage protection, high voltage protection, start-up protection, blocking protection, over-temperature protection, over-current protection, overload protection, runaway protection, battery protection.
Serial control and output (customizable).

Low-voltage protection: Motor start-up is prohibited when the power supply voltage is lower than the permissible value.
High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
Over-temperature protection: When the temperature exceeds 120°C, the maximum output power will be reduced slowly, up to 40% of the full throttle power, and the original power will be restored after the temperature is reduced.
Over-current protection: limit the peak current and do not exceed the limit value.
Overload Protection: When the motor is recognized to be overloaded, the maximum throttle is limited to protect the powertrain.
Loss of control protection: Gradually reduce the output power after losing the signal for 500ms, quickly reduce the throttle to less than 40% within 3 seconds, and then slowly reduce the throttle to stop.
Battery protection: Slowly limits the output throttle to prevent battery over-discharge.