STONE 60A-M
- Industrial-grade professional procedures, safe and reliable
- Highly reliable start algorithm, no fear of headwind starting
- The throttle is anti-phase loss and fast throttle response to reduce the risk of crashes
- Highly intelligent, adaptive working parameters
- Secure matching
- Specification: 60A 6~14S
Features
- The direction of rotation can be set by software
- High-quality components, reliable performance, low internal resistance, MOS, instantaneous current resistance
- The serial port outputs real-time data such as power supply voltage, motor speed, current, ESC temperature and debugging data.
- Shielding signal lines reduces interference
- Optoelectronic isolation signal input and output interfaces isolate interference
- Lightweight design, simple and easy to use, stable and reliable, strong anti-interference ability, good speed regulation performance
protective function
- Low voltage protection: off by default (can be customized on).
- High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
- Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
- Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
- Over-temperature protection: When the temperature exceeds 125°C, the maximum output power is slowly reduced, up to 40% of the full throttle power, and the original power is restored after the temperature is reduced.
- Over-current protection: limit the peak current and do not exceed the limit value.
- Overload Protection: When an overload is identified on the motor, the maximum throttle is limited to protect the powertrain.
- Loss of control protection: 200ms after the loss of signal gradually reduce the output power, in 1~2 seconds for rapid throttle reduction to less than 50%, and then slowly reduce the throttle to stop.
Basic parameter
- Model：STONE 60A-M
- Voltage:6~14S
- Size:71*33*15.5mm
- Weight：79g (including wiring)
- Continuous operating current：60A (specific heat dissipation)
- Instantaneous operating current (less than 3 seconds)：120A
- Standby power consumption：≤10mA@60V
- Throttle travel range:1000~2000us
- Throttle response time:300ms
- Waterproof rating:IP54 (IP67 available upon request)
- Power Cord：Silicone Wire - Red/Black - 14AWG - 150mm
- Three-phase cable:Silicone Wire-Black-14AWG-100mm
- Signal cable: UL1533-24AWG-Gray-540mm
- Throttle Refresh Rate:50~500Hz (100~400Hz recommended)
- Data feedback line:PVC cable - 30 cores - black, red and white - 60mm
- BEC:not
- Input signal level:3.3~5V
- Temperature protection point:125℃
- Means of communication:PWM
Drawings
Test conditions: ambient temperature 30℃, power supply voltage 48V, data for reference only
- Load current 30A, shell without cover, frontal wind speed 8.5m/s heat dissipation conditions, the starting temperature of 31 ℃, after 7 minutes of testing, the work is normal, the MOS temperature of 89 ℃
- Load current 40A, shell without cover, frontal wind speed 10.3m/s cooling conditions, the starting temperature 37 ℃, after 7 minutes of testing, the work is normal, the MOS temperature of 105 ℃
- Load current 50A, shell without cover, frontal wind speed 13.2m/s cooling conditions, the starting temperature of 32 ℃, after 7 minutes of testing, the work is normal, MOS temperature of 117 ℃
- Load current 60A, shell without cover, frontal wind speed 14.0m/s cooling conditions, the starting temperature of 31 ℃, after 3 minutes and 14 seconds of testing, MOS temperature of 125 ℃, overheating protection power drop
- Load current 30A, placed in a cardboard box (15*15*5cm) under the conditions of no air cooling, the starting temperature of 32 ℃, after 3 minutes and 07 seconds of testing, the MOS temperature of 125 ℃, overheating protection power reduction
- Load current 40A, placed in a cardboard box (15*15*5cm) under the conditions of no air cooling, the starting temperature of 32 ℃, after 1 minute and 45 seconds of testing, the MOS temperature of 125 ℃, overheating protection power reduction
- Load current 50A, placed in a cardboard box (15*15*5cm) under the conditions of no air cooling, the starting temperature of 32 ℃, after 1 minute and 24 seconds of testing, the MOS temperature of 125 ℃, overheating protection power reduction
- Load current 60A, placed in a cardboard box (15*15*5cm) under the conditions of no air cooling, the starting temperature of 32 ℃, after 1 minute 06 seconds of testing, the MOS temperature of 125 ℃, overheating protection power reduction
* Specific heat dissipation conditions (low ambient temperature, blowing air, auxiliary heat dissipation surface, feedback MOS temperature below 125°C), can run continuously for 60A, continuous high temperature operation will reduce the ESC service life, it is recommended to keep the feedback MOS temperature below 105°C in practical applications.